The Future of Modded Drivers

Tuesday, December 9, 2014

Modded Catalyst 14.12 Omega Driver (14.501.1003.0) For Switchable Graphics

Catalyst 14.12 Omega (14.501.1003.0) Modded driver for switchable graphics menus fix

For Enduro and PowerXpress Systems



DisAdv:

Still Missing Fixed mode
 Click to show spoiler



Change log
 Click to show spoiler




How to use:
1) make restore point
2) use DDU in safe mode
3) remove all old drivers
4) restart and disable driver signature enforcement
5) install the driver



Supported OS:

Windows 7 64x
Windows 8.1 64x


Windows 8 is unsupported with this driver

Fixed switching mode (muxed) Laptops is unsupported by catalyst 14.12(14.501.1003.0) driver

Supported GPUs:

 Click to show spoiler


FOR INTEL USERS (ENDURO SYSTEMS) GET THE LATEST INTEL DRIVER FROM HERE
For some brands specially Dell it's recommended to install the latest OEM intel driver
Link:

https://downloadcenter.intel.com/default.aspx

Link:

Windows 7 64bit

AMD-Catalyst-Omega-14.12-With-DOTNet45-Win7-64bit-MODDED SG FIX.rar

Windows 8.1 64bit

AMD-Catalyst-Omega-14.12-With-DOTNet45-Win8.1-64bit-MODDED SG FIX.rar


Password:

mahmoudelfar





271 comments:

  1. :D so fast, thanks will try

    ReplyDelete
  2. Thanks mahmoud. Did you notice some improvements? :)

    ReplyDelete
  3. Yes, Thanks again mahmoud on the latest SG fix drivers. I will try these when I have the chance.

    ReplyDelete

  4. Hi,

    I have installed the drivers on my hp dv6 with amd 6670m. Everything ok, but after installation I got a warning (? Yellow). I think that relates: "AMD Accelerated Video Transcoding". The notice is difficult to read because it is being opened with Notepad.

    ReplyDelete
  5. ADD: disappeared the "switchable graphics cards." I have not uninstalled the previous driver .. as I always have!

    ReplyDelete
    Replies
    1. How it didn't work for you paolo? Did you clean the old drivers first with ddu ? What is your full system specifications ?

      Delete
  6. Great work, amazing driver! It works perfect for me (I have radeon hd6770m 2gb) and performance really increased in all my games, I'm so surprised and satisfied! Thank you, Mahmoud!

    ReplyDelete
    Replies

    1. hello,

      you have windows 7? I have the amd 6770 but the drivers do not work.

      Delete
    2. How it didn't work for you paolo? Did you clean the old drivers first with ddu ? What is your full system specifications ?

      Delete
    3. Hello, Paolo! No, I haven't win 7, I use win 10 TP. I just uninstalled previous driver with DDU, rebooted and installed this new one. Also, after installation I went to my system32 folder and renamed "amdmantle64.dll''. That's all.

      Delete
  7. Going to test it on my asus k53ta and see how it works, thanks :)

    ReplyDelete
    Replies
    1. let me know how it goes? I usually like installing 13.4 first to select apps to high performance on configure SG menu, and then overlap install new driver eg. 14.12. So I tried this method but not installing display driver and so CCC not working, nor SG menu. I will try clean install again without 13.4 & see if that works.

      Delete
    2. @ Tony D did it works after DDU?

      Delete
    3. No didn't work....sorry for long delay in response. I noticed now u have Win7x64 version. This is probably the problem for me on original driver upload. I will try later.

      Delete
    4. Everything installed ok with Win7x64 version. I disabled ULPS. As far as performance goes, I don't see much difference to previous driver. I had 14.11b1 which felt a little smoother, even though this may seem a tiny bit faster. Will need to test some more...I don't have latest games, so will decide later if I should roll back to older driver. Thanks for the hard work on these:).

      Delete
    5. dual graphics performance with farcry 3 becomes more smother not what i want but it becomes more playable with dual graphics also there is more improvement with watch dogs the apu overhead solved and the game becomes more smooth didnt test dual graphics with it but i will test it soon

      Delete
    6. Yes just tested dual gfx on some simple old openGL games and they became smoother. I usually use single dgpu but maybe now I 'll use dual gfx when needed. Also games seem to be run cooler on these drivers. Maybe they're more efficient, unsure..but I'll keep testing more PC games. so I'll stay with these driver.

      Delete
    7. Well I just switched back to single dgpu and oc cpu a little with K10stat, and same game plays better, just as good or better than past driver. So great job....might just be a very good driver!

      Delete
  8. Hello mahmoud, I have never cleaned the old drivers and has always worked well. I have a hp 6159sl, windows 7 64bit, amd 6770M.

    the problem can be windows 7?

    ReplyDelete
    Replies
    1. use DDU please and tell me the results because i read some people need to clean the old first before install the omega it have some conflicts with old drivers

      Delete
    2. ok tomorrow I do the test. I'll let you know. Thanks!

      Delete

    3. You have to find compatibility with intel driver :( I have:

      - Safe Mode
      - Uninstalled drivers with DDU and disabled windows update
      - Installed drivers omega unsigned

      But still does not recognize the drivers. Before installing the amd I have to install the intel?

      Delete
    4. after DDU install the intel driver first (get the latest one ) and restart then disable driver signature enforcement and install the modded amd and restart

      Delete
  9. I did everything (safe mode, DDU, intel, reboot with disable driver signing, AMD, reboot) but not with the omega drivers are installed (yellow triangle in device manager). Then I tried to reinstall the beta 14.11.2 and switching functions.

    ReplyDelete
    Replies
    1. what is the problem exactly you cant install the omega driver at all or it installed with bugs?

      Delete
    2. it looks the problem with the driver uploading now win 7 64 bit only version of the driver you should try it i will update the post after uploading

      Delete
    3. check the post i added 14.12 for windows 7 64 bit only try it

      Delete
  10. Can I put you a question?
    WHY this "modded" SG FIX version?
    This 14.12 omega version just has this SG menu..

    I try official 14.12 omega version and (ONLY IN DYNAMIC...and not in Muxed...sigh sigh)..It has the SG menu...so..
    Let me understand...why you make this "modded" version??

    thanks

    ReplyDelete
    Replies
    1. because the the switchable graphics menus is missing for all HD 6000M and 5000M series with all drivers above 13.4 also fixed utilization on the dGPU and some hibernate and sleep bugs
      do you have the switchable graphics menus in 14.12 official one ???!!!

      Delete
    2. yes i have...in dynamic mode I have the SG menu...when process basing..you can choose what GPU (discrete or high) have to play that process...like always...

      Delete
    3. no way you have a SG menus with the official driver on HD5000M and HD 6000M may be you have old registry entries and you installed the new driver over it or even using a third party Fix like the known fixes try to use DDU in safe mode and install the official driver again and you will not found and SG menus i checked the driver my self before modding there is no SG menus at all

      Delete
  11. I have HP DV6-6178sl with i7 + HD3000+ AMD HD6770M (2GB)

    ReplyDelete
  12. Hybernate or WAKEup problems are based on INTEL version driver...I test IT...if You use LEGACY version (i use v.2993) ...all works good...the monitor wakeup after hybernate or sleep mode,

    ReplyDelete
    Replies
    1. It's a problem on incompatib.. from NEW intel drivers and NEW AMD drivers..I think

      Delete
  13. I try to install your drivers...but...there are problems of "mmh..SECURITY...When I exctract in a directory and lunch setup..."Windows" say me that blocks the files because it's from a UNsecurity site...
    so I add you URL in internet oprions....I redownload and reexcract...but when i try to install...It install all but ONLY DRIVER not...It say (yellow in the end) DRIVER ERROR...

    ReplyDelete
    Replies
    1. Google drive becomes UNsecurity site :D hhhhhhhhhhh you should disable driver signature enforcement before installing the modded driver (if the official worked for you WHY USING THE MODDED ONE ?) just a question !!

      Delete
  14. It's MY question...this question....and I have not say that GOOGLE DRIVE is unsecurity..I told you what WINDOWS 7 x64 say me...
    I post you a screenshot of 14.12 OFFICIAL OMEGA AMD installed on my HP...
    SAY ME IF MISS SOMETHING!!
    https://drive.google.com/file/d/0B4ECoZVCLtHha0RDM1FEWHBoQkk/view?usp=sharing.

    ReplyDelete
    Replies
    1. as i told you before you have old registry entries from old drivers and you installed the new driver over it or even using a third party Fix like the known fixes like (leshcat SG fix) may be it's running into your system and add the missing registry to the new driver

      Delete
  15. I used to try all drivers version..official and modded...and after all I choose...this is WHY...
    and also other time There are a lot of setup problems with your driver...my question is...are you sure that you test it on WIN7 x64? or only WIN8...becuase I have friends with WIN8 and your drivers works well...other users on WIN7 say that have problems...so...are you sure?

    ReplyDelete
    Replies
    1. i just added windows 7 64 bit only version try it (no i dont have windows 7 so i didnt test it sorry for that my mistake)

      Delete
  16. and..I UNDERSTAND...I HAVE TO SELECT DRIVER SIGNATURE...I know..I know....I UNDERSTAND...but not works

    ReplyDelete
  17. https://drive.google.com/file/d/0B4ECoZVCLtHhOGZjc2JtRWFqdHc/view?usp=sharing

    ReplyDelete
  18. I clean ALL files with DDU before setup...I'm not rincoglionito (say in google italian)...ok? I had not no files....

    ReplyDelete
  19. ok....I'll try new version....sorry...but It's clear to say when is a WINDOWS error....sorry you 4 my language

    ReplyDelete
  20. mahmoud elfar sorry but YOU ARE WRONG...I posted you 2 screenshot...I have NO OLD REGISTRY...i cleaned all with DDU..after in installed official 14.12 omega from AMD site...and I HAVE SG MENU...like YOU CAN SEE IN MY SCREENSHOT...so....
    You maybe...you only haven't it...your pc model...but i have it....see the screenshot....and not say old reg...I CLEAN ALL WITH DDU....sorry but sometime...

    ReplyDelete
  21. maybe It's a WIN 8 ONLY problem...

    ReplyDelete
  22. OK..I test this NEW WIN7 x64 version...ALL WORKS GOOD....so..I make a 3dmark 11 test..like original version....and...SAME RESULT....I hope for a performance increase...but...thanks 4 your work and patience...bye

    ReplyDelete
    Replies
    1. https://drive.google.com/file/d/0B4ECoZVCLtHhR0U0SzRfejVjYTA/view?usp=sharing

      Delete
  23. Mahmoud Ok, when I get back from work I feel the only driver for windows 7.

    (Sorry for the Italian) SBRAMONE: a quanto ho capito abbiamo lo stessp pc (6770m) ed hai risolto? Come? Hai installato i driver SOLO per windows7?

    ReplyDelete
    Replies
    1. Allora...ho testato sia gli ufficiali AMD sia questi mooddati.
      Si, perchè ribadisco che, almeno sul mio HP DV6-6178sl, i driver ufficiali AMD hanno tutti i menu SG (naturalmente in Dynamic,fixed o muxed non + supportato da AMD dopo i 14.4).
      Dopo la seconda release di questi moddati(cioè questi adesso sul sito, i precedenti erano non installabili o dava errore) li ho installati e testati con 3DMark 11...come gli ufficiali.
      Siccome il risultato è identico(1736 in stock setting) ho reinstallato gli ufficiali AMD ed ora sto con quelli.
      ciao

      Delete
  24. MAHMOUD it all works! The problem was the package win7 + Win8, but only win 7 works! I have not used DDU. I never used DDU!

    The file "mantle64" must rename mantl64?

    Thank you for everything!

    ReplyDelete
    Replies
    1. for me i didn't renamed it but if you got pc hang or similar with ccc you should rename it

      Delete
  25. I installed these drivers in my notebook hp with dual GPU (Intel HD 3000 - AMD HD 6490M), but lack the settings in my ccc than your screen ... then when I close the lid the PC goes into hibernation but when I open my remains black screen ... also the account screen is blocked for 2-3 minutes and the same happens after 1-2 minutes That You have started the pc

    ReplyDelete
    Replies
    1. Per il blocco di due minuti devi rinominare il file mantle64.dll in mantl64.dll che si trova in c:--windows--system32

      Delete
    2. hibernation is a shutdown for your pc but with saved session of your pc state like opened apps
      so if you want turn on again you should power on your pc not just open the lid you can also rename the amdmantle64.dll @ c\windows\system32 and also disable ulps

      Delete
    3. sorry but I have not figured out how to solve the problem of sospensione..rimane always black screen and I have to force the closure of the pc ... I also renamed the file "amdmantle64.dll" but the problem remains ..

      Delete
    4. sospensione..rimane??? what is this exactly i cant understand !!

      Delete
    5. I have the problem of the suspension ..when I close the lid of the computer, and then I open the lid the screen stays black and I have to force the closure of the PC with the power button ..

      Delete
    6. so I have to install drivers intel on the site hp ?? Although these are very old?

      Delete
    7. yes they are old but should solve that problem and which intel driver you are using now?
      also use only i repeat ONLY the intel driver from OEM not amd driver

      Delete
    8. At the moment I have installed the latest drivers available on site intel (v 9.17) ... And if I install the OEM drivers intel and after those updated .. could solve the problem ??

      Delete
    9. yes it should solve it as it's fully support for your PC

      Delete
    10. I have a problem .. I downloaded the drivers only from Intel site hp .. but I can not install them .. I said "the system does not have the minimum requirements for installing the software" .. and the only ones that make me install are unified drivers "Intel / AMD"

      Delete
    11. I install these drivers unified "intel / amd" and then install the latest drivers for your intel and amd driver ??

      Delete
    12. if you have OEM windows try to use the latest version of DDU or install a non OEM windows to solve this problem with the intel driver or use the latest one wroked with you and install the new modded amd driver after that

      Delete
  26. Hello MAHMOUD , I tested this driver, so, in games - far cry 4 a bit fps gain 3 to 4 fps. Youtube video playback (flash) runs better now. Only one problem, on cold start up(restart works good) windows 8.1 loads bit slower, black screen for 7 seconds and after that, windows log in screen popups. In drivers 14.4,windows 8.1 started up much faster.

    ReplyDelete
    Replies
    1. disable ulps and rename the amdmantle64.dll @ c\windows\system32

      Delete
  27. And one question MAHMOUD, do you disabling ULPS ? When I disabling ulps, my pc is overheating 55-65C when browsing chrome(youtube) , but when ulps is enabled my laptop is about 40C.
    Games runs the same fps when ulps in disabled or enabled, i don't see the difference, so do fraps - shows the same fps.

    ReplyDelete
    Replies
    1. i always disable the ulps because i can't overclock when it enabled and it make some games a bit faster ULPS is making your pc to use lower clocks to reduce power consumption so your temps was low and when you disabled it your pc use it's maximum clocks so that you find more temps added

      Delete
  28. you can select flash or silverlight with "high performance" with amd and not with intel? Firefox is locked by the lock, this not only with omega but also with old drivers.

    ReplyDelete
    Replies
    1. amd locked some apps from using the high performance gpu due to some compatibility problems

      Delete
    2. also the locked apps dont need that much power even the iGPU can max it with no problem

      Delete
    3. If you install the older driver AMD CCC 13.4 first & then on configure SG menu, select apps to high performance or based on power, you can then overlap install new drivers eg. AMD 14.12 SGfix. But the new setting will become permanent until you clean install new drivers in the future. But Not sure if there is any incompatibility,bugs or any noticeable difference in apps performance.

      Delete

  29. Sorry for too many questions:

    In my notebook with 6770M, win 7 I have everything to maximum.
    - Energy saving in "high performance"
    - In the catalyst: "maximizes performance"

    I also have to disable ULPS? How to disable? This guide is correct? http://www.tomshardware.co.uk/faq/id-1904869/disable-ulps-amd-crossfire-setups.html

    ReplyDelete
    Replies
    1. the guide is true you can use it or use this tool it's much easier to use just run as admin and put 0 to disable and 1 to enable and restart after each mode to take affect
      LINK: https://mega.co.nz/#!YoAkwY5B!XeckMjp8gMegt9fA9wjGo-nqqW1GQv3-XxZtGcOCOto
      and if every things works fine without it so no need to disable

      Delete
    2. Should not be permanently disabled? It should be disabled only during the game?

      Delete
    3. it will permanently disabled until you uninstalled the current driver and install a new one

      Delete
    4. This ulps is only valid for the crossfire? I do not have the crossfire ..

      Delete
  30. always when a try to install driver , it crash the system, i have windows 8.1 64bits ati hd 5470

    ReplyDelete
    Replies
    1. clean the old drivers first with DDU

      Delete
    2. hp g62-b85ss
      windows 8.1 64 bits
      intel hd graphics first generation
      ati hd 5470

      Delete
    3. use this intel driver http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-116851-1 but clean the current drivers first

      Delete
    4. thns , now i cant install it but nothing happens, the device manager show the exclamation mark on driver

      Delete
    5. what is the problem with the intel driver ? did you cleaned the the current drivers first then install it and then the modded amd driver?

      Delete
  31. Mahmoud, what is the best configuration for better performance in games, in CCC?
    Image: http://i60.tinypic.com/29kqf77.jpg

    ReplyDelete
  32. Can you list the steps for how you're modifying this driver? I'm trying to similarly create a modified driver for the Retina 5k iMACs.

    These two lines below would properly identify the card but are missing from the original inf file. I tried adding them but that wasn't enough. I then tried modifying all the MSI files with a HEX editor and replacing 6921 (the non-apple DEV code) with 6938; wasn't enough. I then replaced the ATI InstallManagerApp.msi with one from the beta version and that allowed setup to launch, but then the Catalyst install manager still doesn't see the availability of a correct driver. I tried installing the driver by itself using it's MSI but it says it needs the ATI Install Manager to install. I'm stuck.

    "%AMD6938.1%" = ati2mtag_Tonga, PCI\VEN_1002&DEV_6938&REV_00
    AMD6938.1 = "AMD Radeon R9 M295X"

    Any help would be greatly appreciated. Thanks!

    ReplyDelete
  33. Is it normal when I uninstall the drivers, windows will install the old version of the drivers. It says there on the device installer "video controller” (VGA Compatible)

    ReplyDelete
  34. Then my Intel graphics would have a code 19 error saying the registry files are damaged. It happened when I uninstalled the AMD driver only and both drivers too. Its like those two are interconnected when one is uninstalled the other will also be uninstalled. I can't also install the Intel driver from HP on its own. They say to install the AMD only because it includes the Intel drivers. Is changing my OS can help solve this problem?

    ReplyDelete
    Replies
    1. i told you before to change that OEM windows or try the latest version of DDU

      Delete
  35. Hello Mahmoud elfar. Do you think this driver will work fine for 6520g+6470m.

    ReplyDelete
    Replies
    1. sure it will work just clean the old driver with ddu first i have 6520G+ 6750M and it works very well

      Delete
  36. i uninstalled intel hd graphics with intel core drivers and amd 5650M drivers then reinstalled intel drivers from windows update after that when trying to install this driver the pc crashes and restarts till it's going to safe mode help

    ReplyDelete
    Replies
    1. use DDU remove all old drivers intel + amd >restart > install the OEM driver only select the intel component and after installation restart and disable driver signature enforcement and install the amd driver

      Delete
    2. I experience the same problem with my AMD 5650M (following your steps to the word). When I update the AMD driver, the system BSODs and my laptop goes into a restart loop. I have experienced the same issue with 14.11 and 14.9 also but not 14.4. Would you know why this happens?

      Delete
    3. I also wanted to mention that I tried updating the AMD driver from Device Manager alone and I still experience the same issue.

      Delete
    4. it looks like you have fixed switching mode (muxed ) so that you got these BSOD currently i dont have any solution or fix for it all i can advice you to do is to try to disable the iGPU from the bios if you can and try again with the amd driver

      Delete
    5. Thanks for your reply Mahmoud. That is true. I have fixed switching mode. Problem is the latest BIOS release doesn't have the option to disable the iGPU. Do you know of any other method to disable the iGPU? All I need is to use the AMD graphics card using the latest graphics drivers but can't seem to do so because of AMD stopping support on muxed systems.

      Delete
    6. search for modded bios for you pc so you can disable the iGPU ( at your own risk)

      Delete
  37. thanks for the modded software mahmoud i have a question is anyone else experiencing any problem with assassins creed unity after installing of this software. and what does changing the name of file amdmantel64.dll achieves and to what should it be changed as

    ReplyDelete
    Replies
    1. http://b1.raptrcdn.com/img/screenshots/orig/7206b0ab157ddf4e3e4d880cf4cc8421.b06ee48242edf475ab595430615e8f48.jpeg
      this is what is showing when i launch the game

      Delete
    2. i read in another forums a lot of people have the same problem you should report this to amd

      Delete
    3. for renaming amdmantle64.dll you dont need it if everything works well

      Delete
  38. Hello. I have problem with drivers newer than 14.4 Screen freeze until 30 seconds when windows booting in welcome screen and wake up from sleep. Maby you have solution ? (in your drivers i have this same problem)
    Notebook hp dv6 6b15ew (3410 processor and 6750G graphic )

    ReplyDelete
    Replies
    1. do you have fixed mode or dynamic mode ?

      Delete
    2. I solved this disabling ULPS. I another way to solve this ?
      Fixed or dynamic ? Whad you mean ?

      Delete
    3. fixed switching mode (muxed) and dynamic switching mode (muxless)

      Delete
    4. I have turn on dual graphic (i think this is muxed mode :P )
      I dont have missing menu like in 14.4 (installed you drivers .... )
      [IMG]http://i62.tinypic.com/idzq11.jpg[/IMG]

      Delete
    5. it's muxless not muxed, you have the switching menus with the official driver or the modded??

      Delete
    6. This ss present yours modded drivers.

      Delete
    7. CCC are correctly installed ?

      Delete
    8. yes , the fixed mode (configure switchable graphics method menu) becomes unavailable with all drivers above 14.4

      Delete
    9. Ok, but my fan non stop working because I disable ULPS ;/

      Delete
    10. disable ulps makes your pc to use it's maximum power and forget about power saving so that you may find that your pc has some more +Temps so that the fan always working but with me this not happened although i disabled it ,seems it's the time to clean your pc from dust

      Delete
    11. I have notebook and they is clean ;) When ULPD is enabled fans not working in normal using. I waiting for any solution without disabling ULPD. (problem with wake up)

      Delete
  39. Hello Mahmoud driver works under windows 7 64bits R9M265X + Intel HD 4400
    Chokran

    ReplyDelete
  40. Well, after installeing these drivers on my asus k53ta i experienced some issues, first of all, i couldn't even install them, always got a bsod when doing so, after that i decided to do a fresh windows 7 install, i needed it anyways. After installing windows 7, i could install the driver without problems, but then i noticed that the system was hanging for about 30 seconds in the welcome screen just after logging in, after that the system was working just fine, but then after i reinstalled all my programs i experienced system crashes when launching visual studio 2013, every time it would crash, so i had to unistall the driver and go back to the 14.4, so yeah i guess i'll skip this version. If anythingm these are my laptop specs:
    apu: a6-3410mx, dedicated gpu: hd 6650m

    ReplyDelete
    Replies
    1. disable ULPS and try to rename amdmantle64.dll @ c\windows\system32 to any thing else ex: amdmantl64.dll

      Delete
  41. Hey, Mahmoud, the driver works perfect, but I have only one issue. Sometimes, after waking up after sleep mode I have artifacts on my screen. I just open notebook, see artifacts and after that screen starts blinking and freezing. All I can do is turn off notebook with power button and restart. After that everything works properly. Also, I disabled ULPS and renamed amdmantle64. So, please, help me to fix this problem. Any ideas?

    ReplyDelete
    Replies
    1. HP Pavilion dv7 6b54er

      Intel Core i7 2670QM 2.2Ghz
      8 GB 1333 RAM
      ATI Radeon HD 6770M 2GB
      Intel HD 3000 (with latest drivers)
      Windows 10 Technical Preview x64

      Anything else?

      Delete
    2. Windows 10 Technical Preview !!! it's still in beta testing so you can expect more problems my advice is trying the OEM intel driver (i know it's very old) or just disable sleeping

      Delete
    3. Ok, thank you for advices. At first I'll try a new Win 10 version, which was leaked today. If it won't solve my problem I'll try OEM driver. Anyway, thank you again!

      Delete
  42. Is this going to work on my HD 8850M? It's not listed anywhere and I'd really lov to play AC Unity at a decent number of FPS.

    ReplyDelete
  43. I installed the new driver on a fresh new windows installation ,the driver works (never tested on any game yet ) the problem is when I hit the power button and the windows runs, the computer freezes for a couple of minutes , is there any solution ? I have Intel 2nd generation processor and Amd Radeon 6400m series .
    thanks

    ReplyDelete
    Replies
    1. try to disable ULPS some times it solve this problem

      Delete
    2. Thanks a lot, it seems like it worked . I have another question though . it seems that you over clocked your lap card , is it safe ?how can I do it ? does it have any noticeable effect on the performance?
      any way thanks again .

      Delete
    3. safe if you know what you are doing ex not too much OC your pc is clean from dust and at least have a cooling pad or air conditioned room (dont OC the video memory very high at least 50 MHz with each test ) software needed just msi after burner and for performance gain it's about 5~8 FPS depending on your GPU and the amount of OC and the game engine and how your cpu can handle the new GPU clocks

      Delete
  44. hi mahmoud bro does this driver solve the 8670m sleep issue on dell enduro laptops ? Many thanks.

    ReplyDelete
  45. Hi mahmoudelfar, do you recommend the installation of your driver if the official one works well in my system? Can i expect some performance increase? My notebook has a 8850m (r9 270), thanks.

    ReplyDelete
    Replies
    1. if the official driver works well with you then there is no need to use the modded driver but if you want to try it you can use it as instructed above

      Delete
  46. Does this driver really improves fps of the latest games? I read some posts that it makes some applications run worst on the system. What can you say about it based on your personal experience on the driver?

    ReplyDelete
    Replies
    1. it has a very good performance and if you playing the latest titles sure you will need it but if not and 13.4 doing it's job there is no need to update

      Delete
  47. I just want to know if its worth updating because I will replace my OS just like you suggested. I don't want to waste my time if it doesn't really do much better than the 13.4 I have.

    ReplyDelete
  48. hey mahmoud,
    i did everything according to the tutorial however, when i run MSI afterburner, it recognizes my card as an "AMD Radeon R9 M265 X"
    my card is an AMD Radeon 8850M
    does this have a difference in performance?
    thanks!

    ReplyDelete
    Replies
    1. there is no problem at all it just amd rebranding some HD 8000M series and it haven't any difference in performance

      Delete
    2. thanks!
      one last question. i have a dell 3537, i7 with the card i mentioned. however, fps is really low, even in the lowest options.... is there someway i can improve fps, or is my laptop just not powerful enough? :P

      Delete
    3. lol, sorry, forgot to mention it :P
      far cry 4

      Delete
    4. in general try to set the switchable graphics to maximize performance and set the windows power plane to high performance you can also disable ULPS

      Delete
    5. Do you have an 8850m and now is displayed has an r9 265? Mine is renamed has r9 270, weird.

      Delete
  49. there is a setting for configuring switchable graphics within the game? or within the AMD catalyst control panel? also, what is ULPS and how do I disable it? sorry for the questions!

    ReplyDelete
    Replies
    1. you have two options for switchable graphics
      1 switchable graphics application settings
      2 switchable graphics global settings
      to disable ULPS use this app : https://mega.co.nz/#!YoAkwY5B!XeckMjp8gMegt9fA9wjGo-nqqW1GQv3-XxZtGcOCOto
      run as admin enter 1 to enable and 0 to disable and restart

      Delete
    2. so, changed the global settings to maximize performance, changed the power plan to high performance, and now FPS is even lower.... :S

      Delete
  50. no amd graphic driver is installed or the graphic driver is not working properly ..same msg with every driver i tried to install

    ReplyDelete
  51. i am really fed up and had no clue what to do, what really bothers me i used some program and it did it for me before but i forgot its name, i am so frustrated

    ReplyDelete
  52. I have msi gx60 notebook. Can i disable 8650g on my laptop? I can on catalys 14.4, but on new drivers some games have really good fps which more then on 14.4+disabling 8650g

    ReplyDelete
    Replies
    1. 14.4 supports fixed mode that was terminated with all newer drivers so if you want to disable 8650g you need to check your bios if it support this

      Delete
  53. Hey mahmoud, it's me again, the same person who had problems with the 14.9 modded driver. So ive decided to give it another go. Would you recommend the omega driver or the latest one you posted? My graphics specs are:
    Intel hd 4400
    Amd radeon 8670m hd 2gb
    Intel 4200u @ 1.6ghz

    ReplyDelete
  54. Hey mahmoud!
    I'm trying for month, but no luck for me.. Maybe you can help me. I have a dell 3737 with 8870M. I had sleep/hibarnate problems, your modded driver fixed it. But as always since new amd drivers, it detects my vga as M270X. It would not be a problem, but my performance is really bad. Far Cry with 15 and Skyrim with 20 fps..
    I'm using games in high performance.
    Also since I have this problem, my cooling is more silent, and it doesn't warm up as much, like it's not using all his resources.. Sorry for my bad english. Hope you can give me some advice.

    ReplyDelete
    Replies
    1. Forgot to mention:
      When I had windows 8, and old drivers from dell site, my performance was much better. Since 8.1 I had the sleep/hibarnate problem, after I solved that, my performance is so low..

      Delete
    2. Also League of Legends can do 60fps.. It's ridiculous. It could do over 120.

      Delete
    3. try to check the windows power plane and set it to high performance and also check the ccc switchable global settings and set it to maximize performance also be sure you are playing on AC plugged in

      Delete
    4. Tried all several times before, tried it now. Doesn't work :(

      Delete
    5. which intel driver you are using ?

      Delete
    6. I'm using that one. Followed all steps that you mentioned above.

      Delete
    7. try the latest intel driver from intel website or the intel driver from windows update

      Delete
  55. Help pls, I have HP Pavilion dv6-6b60ec (Intel HD Graphics Family+AMD HD 6770m) and I tried installing your 14.12 drivers (yes I used DDU in safe mode I uninstalled my current 13.6 drivers), but after installing your modded 14.12 drivers and restarting my PC, it runs only on Intel card, I can't open catalyst and I have that "yellow triangle" in device manager... What should I do? ://

    ReplyDelete
    Replies
    1. did you disabled the driver signature enforcement before installing the modded driver?

      Delete
    2. No, but during the installation it asks me if I really want to install what driver, so I hit "yes"...

      Delete
    3. Ok, I disabled it as you sad, but still the same problem...:/// (BTW...I have Win 7 64bit Home Premium)

      Delete
    4. first send the install log (C:\Program Files\AMD\CIM\Reports\Report.(install date).xml)
      did you downloaded the windows 7 driver version ?
      what about the intel driver that currently installed ?

      Delete
    5. Yes I downloaded W7 version, I'll send you that log later... my current Intel driver version...8.15.10.2476, I'm downloading some drivers from Intel's page right now, so I'll write later.

      Delete
    6. Ok, so I installed new Intel drivers and nothing happend, when I open Intel graphics control panel and click on information it still says driver version 8.15.10.2476. So I'll probably use DDU to uninstall both AMD and Intel drivers, then install the intel drivers first and after them I'll install AMD drivers...

      Delete
  56. Thanks Mahmoud! Solid perfomance in all games I tested, and didn't face a a single issue like the power state bugs (not shutting down, waking up from sleeping etc.). Another great job, please don't stop with the modding business, me and every mobile Radeon GPU user is very grateful!

    ReplyDelete
    Replies
    1. you are welcome nice to see everything is good with you :)

      Delete
  57. should i download intel drivers from dells website or intel website?

    ReplyDelete
    Replies
    1. if your laptop is dell sure download the latest intel driver from their website

      Delete
    2. i need help. safe mode>ddu intel> restart> ddu amd > install dell intel drivers> restart disable digitally unsigned>installed amd modded while installing the screen went black and my laptop restarted

      Delete
    3. in device manager it show the amd card with 14.5 installed but when i right click on desktop it doesnt show switchable graphics or amd settings :s

      Delete
    4. if the driver installed correctly run the setup of the amd driver again and only select the catalyst control center or select all without the display driver

      Delete
    5. you must install the intel driver first

      Delete
    6. should i go in the digitally unsigned mode?

      Delete
    7. sorry for bothering you. I'm a total noob :(

      Delete
    8. no need you wont install the display driver it's just the catalyst control center

      Delete
  58. hey my screen just went black. had to restart and now device manager says that there are problems with boh my video cards ._.

    ReplyDelete
    Replies
    1. you told me yesterday it worked what happened after that ?

      Delete
  59. حضرتك موجود يا استاذ محمود ؟

    ReplyDelete

Note: Only a member of this blog may post a comment.